Sony PCWA-A200 Wireless Palette Help File - Page 3

4. Advanced button Click this button to expand the window downward and view the wireless connection status and Advanced information about the Access Point. 5. Tool Box button Click this button to display the Tool Box dialog box. This dialog box allows you to view and change the Access Point and the Wireless LAN PC Card settings. Access Point List A list of registered Access Points is displayed in the Wireless Palette. Select Selects an Access Point to use. Select the Access Point you want to use from the Access Point List and click this button. Add Adds a new Access Point to the Wireless Palette. For details on the operation, see Registering the Access Point. Delete Deletes an Access Point from the Wireless Palette that is no longer required. Select the Access Point you want to delete in the Access Point List and click this button. 6. Reception level indicator The reception level indicator icon indicates whether or not your computer is communicating with the Access Point. When this indicator appears as , no communications are taking place between your computer and the Access Point. If the computer is located close enough to the Access Point for communications but the same indicator appears, check the Access Point setting. 7. Dial-up status indicator When Phone Connection is the selected Connection Mode of the Access Point, either one of three statuses is indicated: Disconnected , Dialing , or Connecting . 8. Dial-up Connect/Disconnect button When Phone Connection is the selected Connection Mode of the Access Point, the Connect or Disconnect buttons is displayed. Click Connect to connect to the ISP or Disconnect to disconnect from the ISP. Note o This button is enabled for the dial-up connection only and not displayed in the other connection modes. o Clicking Disconnect disables Connect for a minute. o Clicking Disconnect may not notify other clients of your disconnected status. Page 3