Sony PDWU1 Family Brochure (XDCAM Family Brochure) - Page 11

Common Features on Both Camcorders ■ 16:9/4:3 Switchable Power HAD™ EX CCDs XDCAM camcorders incorporate three 16:9/4:3 switchable CCDs for their image capture device. Using the best of Sony CCD technology, this allows for outstanding picture quality with a high signal-to-noise ratio of 65 dB (NTSC)/63 dB (PAL), low smear level of -140 dB (typical), and high sensitivity of F11. ■ Shock- and Dust-Resistant Disc Drive To minimize errors caused by shock or dust entering the disc drive, XDCAM camcorders have several unique ways of providing operational resistance to such factors. The disc drive entrance is concealed by two lids helping to prevent any dust from entering the drive. In addition, four rubber dampers are used to hold the disc drive block in place helping to absorb the shock that would otherwise go into the disc drive. ■ 12-bit A/D Conversion XDCAM camcorders also incorporate a high-integrity 12-bit A/D converter, so that the high-quality images captured by the Power HAD EX CCDs are processed with great precision. In particular, this high bit resolution allows contrast to be reproduced precisely in mid-tone areas of the picture. ■ Advanced Digital Signal Processing A key to quality in DSP cameras is how many bits are used in their nonlinear processes, such as gamma correction. XDCAM camcorders use more than 30 bits, minimizing round-off errors so the high quality of the CCDs is maintained. The DSP LSI of XDCAM camcorders also enables highly sophisticated image Four Shock-Absorbing Dampers control such as Multi-Matrix function, and Triple Skin-Tone Detail control. ■ Compact, Lightweight Body ■ 2.5-inch* Type Color LCD Screen An easy-to-view color LCD XDCAM camcorders are designed to be very screen provided on the compact and lightweight, for a high level of mobility camcorder side panel in the field. They weigh approximately 12 lb 9 oz enables advanced (5.7 kg) including viewfinder, microphone, disc and operations such as BP-GL95 battery pack. Thumbnail Search and ■ Rugged and Ergonomic Design Scene Selection. Status indications such as The design of these camcorders is based on years of Sony experience in camera ergonomics, and provides a high level of mobility and balance. The shoulder pad position is adjustable and the viewfinder height can be selected from two positions, while rear panel connectors are located well away from the four-channel audio meters, and disc and battery remaining time can also be displayed. In addition, camera set-up menus can be displayed. battery pack, making it easy to connect cables. Operators *Viewable area measured diagonally. familiar with the comfort benefits of Sony BETACAM Two mount positions camcorders will immediately feel at home with XDCAM camcorders, which extend this comfort even further. 11