Sony PRS-T3S Users Guide - Page 151
Reader Device, Power On/Off, Battery
View all Sony PRS-T3S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Reader™ User Guide SeFairncdh Print Getting started Basic Operations Adding/Getting Content Browsing Content Lists Reading Organizing Other Applications Settings Other Information Contents list Top page > Other Information > Troubleshooting > Reader Device Reader Device Power On/Off The Reader cannot turn on. The Reader cannot be operated if connected to your computer and set to data transfer mode. Use the safely remove hardware function of your computer, and then disconnect the USB cable from the Reader. Moisture condensation may have occurred. Wait for a few hours and then turn on the Reader. If the battery is completely depleted, power will not be supplied to the (Power) button, and you may not be able to turn on the Reader. In this case, connect the Reader to your computer via the supplied USB cable; the Reader will turn on immediately. If the Reader does not turn on, press the (Power) button. If the Charge indicator blinks red 3 times, disconnect the USB cable from the Reader, then reconnect approximately 5 minutes later. The Reader cannot turn off or enter sleep mode. If the Reader screen freezes and stops responding, the (Power) button will also not work. In this case, reset the Reader. See Details. The Reader automatically enters sleep mode or turns off. To conserve the battery's charge, the Reader includes automatic power saving modes. The Reader will enter sleep mode after 10 minutes of inactivity. After 3 days* in sleep mode, the Reader will shut down/power off automatically. * If the battery's charge is low, the Reader may automatically turn off within 3 days. However, when viewing a slideshow, this feature does not work. The automatic power saving modes cannot be turned off. Battery Cannot charge the Reader. If you use other than the supplied USB cable to charge the Reader, it may not charge correctly. To charge the Reader, use only the supplied USB cable and, optionally, the AC Adapter (PRSA-AC10/PRSA-AC1A, sold separately). See Details. If you are charging from the USB port on your computer, make sure that the Reader is connected directly to the USB port with the supplied USB cable. Do not use a USB hub. The battery has not been given enough time to fully charge. Charge the Reader until the icon changes to the icon. (The charge icon does not indicate the remaining battery power while charging.) Your computer must be turned on to charge the Reader. The Reader will not be charged if your computer enters sleep mode or standby mode. Keep your computer turned on with a stable and continuous power supply while charging the Reader.