Sony PSLX250H Operating Instructions - Page 6

Maintenance - stylus for

Page 6 highlights

Additional Information Maintenance Stylus and Record Care In order to prevent premature stylus and record wear, the stylus and record should be cleaned before playback. To clean the stylus, brush it from back to front using a good quality stylus cleaning brush. Do not clean the stylus with your finger tip. When using a fluid stylus cleaner, make sure not to moisten the stylus too much. To clean your records, wipe thoroughly using a good quality record cleaner. Cleaning the Cabinet and Dust Cover Clean the cabinet and dust cover periodically using a soft dry cloth. If stains are difficult to remove, use a cloth moistened with a mild detergent solution. Do not use solvents such as alcohol, benzine or thinner, since they will damage the finish. Replacing the Stylus The life expectancy of the stylus tip is about 500 hours. To preserve maximum sound quality and avoid damage to your records, we recommend replacing the stylus within this time limit. For a replacement stylus, consult your nearest Sony dealer. To replace the stylus 1 Turn off the amplifier. 2 Protect the stylus with the stylus cover. Stylus cover 3 Grasp the stylus holder and pull it away from the body of the cartridge. Stylus holder 4 Insert the new stylus by pushing it into the cartridge receptacle. 6GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

6
GB
Cleaning the Cabinet and Dust Cover
Clean the cabinet and dust cover periodically using a
soft dry cloth. If stains are difficult to remove, use a
cloth moistened with a mild detergent solution. Do not
use solvents such as alcohol, benzine or thinner, since
they will damage the finish.
Replacing the Stylus
The life expectancy of the stylus tip is about 500 hours.
To preserve maximum sound quality and avoid
damage to your records, we recommend replacing the
stylus within this time limit.
For a replacement stylus, consult your nearest Sony
dealer.
To replace the stylus
1
Turn off the amplifier.
2
Protect the stylus with the stylus cover.
3
Grasp the stylus holder and pull it away from the
body of the cartridge.
4
Insert the new stylus by pushing it into the
cartridge receptacle.
Maintenance
Stylus and Record Care
In order to prevent premature stylus and record wear,
the stylus and record should be cleaned before
playback.
To clean the stylus, brush it from back to front using a
good quality stylus cleaning brush. Do not clean the
stylus with your finger tip. When using a fluid stylus
cleaner, make sure not to moisten the stylus too much.
To clean your records, wipe thoroughly using a good
quality record cleaner.
Additional Information
Stylus cover
Stylus holder