Sony RCP-1000 Operation Guide - Page 5
Connection example for MCS mode
 |
View all Sony RCP-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Connection example for MCS mode Camera heads CCU RCP-1000 MSU-1000/1500 RCP-1001 CCA-5 cable LAN straight cable (category 5 or above) • In MCS mode, be sure to set one of the multiple MSUs as the master. Not to turn off the power or disconnect the cable of the master MSU during operation. • The maximum number of devices that can be directly connected to the network is 96 excluding the master MSU. This maximum number does not include any RCP connected by CCA cable to a CCU connected to the network or any CCU connected by CCA cable to a RCP connected to the network. A client MSU is counted as one unit. • A CNU and VCS cannot be connected to a system that will be used in MCS mode. 5 Overview
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
Overview
5
Connection example for MCS mode
•
In MCS mode, be sure to set one of the multiple MSUs as the master. Not to turn off the power or disconnect the cable of
the master MSU during operation.
•
The maximum number of devices that can be directly connected to the network is 96 excluding the master MSU. This
maximum number does not include any RCP connected by CCA cable to a CCU connected to the network or any CCU
connected by CCA cable to a RCP connected to the network. A client MSU is counted as one unit.
•
A CNU and VCS cannot be connected to a system that will be used in MCS mode.
Camera heads
CCU
MSU-1000/1500
RCP-1000
LAN straight cable
(category 5 or above)
RCP-1001
CCA-5 cable