Sony RDH-GTK37iP Operating Instructions - Page 18

Compatible smartphones Smartphones with a built-in NFC function (OS: Android 2.3.3 or later, excluding Android 3.x) 2 Start the app "NFC Easy Connect" on the smartphone. Make sure that the application screen is displayed. 3 Touch the smartphone to the N-Mark on the system until the smartphone vibrates. Complete the connection by following the instructions displayed on the smartphone. When the Bluetooth connection is established, the BLUETOOTH indicator stops flashing and remains light up. Bluetooth device name appears in the display panel. You can switch the sound source from the smartphone to another NFCcompatible Bluetooth device. For details, refer to the operating instructions of your Bluetooth device. Tip If pairing and the Bluetooth connection fail, do the following. - Relaunch "NFC Easy Connect" and move the smartphone slowly over the N-Mark. 18GB - Remove the case from the smartphone if using a commercially available smartphone case. Playing music from a Bluetooth device You can operate a Bluetooth device by connecting the system and a Bluetooth device using AVRCP. Check the following before playing music: - The Bluetooth function of the Bluetooth device is turned on. - Pairing has been completed. x For a Bluetooth device 1 Press BLUETOOTH on the unit to select Bluetooth function. "BT AUDIO" appears in the display panel. 2 Establish connection with the Bluetooth device. The last connected Bluetooth device will be connected automatically. Perform the Bluetooth connection from the Bluetooth device if the device is not connected. Once the connection is established, the Bluetooth device name appears in the display panel. 3 Press N. Depending on the Bluetooth device, - you may need to press N twice. - you may need to start playback of an audio source on the Bluetooth device. Notes • When the system is not connected to any Bluetooth device, the system will connect and playback from the last connected Bluetooth device automatically when you press N. • If you try to connect another Bluetooth device to the system, the current connected Bluetooth device will be disconnected.