Sony RDH-GTK37iP Operating Instructions - Page 23

Other Operations 1 Prepare the sound source, then press VOLUME +/- to adjust the volume. 2 Press TIMER MENU. 3 Press / repeatedly to select "PLAY SET", then press . 4 Set the time to start playback. Press / repeatedly to set the hour/minute, then press . 5 Use the same procedure as in step 4 to set the time to stop playback. 6 Press / repeatedly to select the sound source you want, then press . 7 Press "/1 to turn off the system. To check the timer setting or activate the timer again 1 Press TIMER MENU. "TIMERSEL" flashes in the display panel. 2 Press . 3 Press / repeatedly to select "PLAY SEL", then press . To cancel the timer Repeat the same procedure as above and select "OFF" in step 3, and then press . Notes • The system turns on before the preset time. If the system is turned on at the preset time or if "STANDBY" flashes in the display panel, the Play Timer will not play. • Do not operate the system from the time the system turns on until the playback starts. Notes for the iPod/iPhone user • Make sure the iPod/iPhone is not playing when using the Play Timer. • The Play Timer may not be activated depending on the status of the connected iPod/ iPhone. Changing the display Changing the display mode Press DISPLAY repeatedly while the system is turned off. Demonstration The display changes and the indicator flashes even when the system is turned off. No display (Power Saving Mode) The display is turned off to conserve power. The timer and clock continue to operate. Or, iPod/iPhone Charging Mode "CHARGING" appears and the system continues to charge the iPod/iPhone. Clock The clock display automatically turns to Power Saving Mode after 8 seconds. Viewing information in the display panel Press DISPLAY repeatedly during USB function when the system is turned on. You can view the information as follows: • The elapsed playing time, file name and folder name. • The title, artist and album information. 23GB