Sony RDR-VX521 Operating Instructions - Page 21
Controlling a Sony TV with the, remote, Controlling the volume of a Sony AV - codes
View all Sony RDR-VX521 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Hookups and Settings Controlling a Sony TV with the remote You can use this remote to operate your Sony TV. Use the buttons marked with an orange dot (•). TV/DVD·VIDEO switch "/1 Number buttons, SET CH +/- VOL +/- TV/VIDEO Controlling the volume of a Sony AV amplifier (receiver) with the remote If you connect the recorder to a Sony AV amplifier (receiver), you can use the supplied remote to control the AV amplifier's (receiver's) volume. Set the code number for your AV amplifier (receiver) to control it. TV/DVD·VIDEO switch "/1 Number buttons VOL +/- WIDE MODE Slide the TV/DVD·VIDEO switch to TV. The remote performs the following: Press "/1 VOL +/- CH +/- TV/VIDEO Number buttons and SET WIDE MODE To Turn your TV on or off Adjust the volume of your TV Select the channel on your TV Switch your TV's input source Select the channel on your TV Switch to or from the wide mode of your wide-screen TV Note Depending on the connected unit, you may not be able to control your TV with some or any of the buttons. 1 Slide the TV/DVD·VIDEO switch to DVD·VIDEO. 2 Hold down "/1 and enter 78, 79, 80, or 91 using the number buttons. 3 Release "/1. The VOL +/- buttons control the AV amplifier's volume. If the buttons do not work, try the other numbers one at a time. If you want to control the TV's volume, slide the TV/DVD·VIDEO switch to TV. z Hint If you want to control the TV's volume even when the TV/DVD·VIDEO switch is set to DVD·VIDEO, repeat the steps above and enter the code number 90 (default). ,continued 21