Sony RDR-VX521 Operating Instructions - Page 82
Press SYSTEM MENU to turn off the menu., To stop recording, If timer settings overlap
View all Sony RDR-VX521 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
6 Press SYSTEM MENU to turn off the menu. To stop recording Press x STOP twice. If timer settings overlap The program that starts first has priority and the second program starts recording only after the first program has finished. If the programs start at the same time, the program listed first in the menu has priority. If the end time of one setting and the start time of another timer setting is the same, the beginning of the program that starts later will be cut. 7:00 8:00 9:00 10:00 Program 1 Notes • To record a cable or satellite program without using cable box/satellite receiver control, turn on the cable box or satellite receiver and select the program you want to record. Leave the cable box or satellite receiver turned on until the recorder finishes recording. • Even when correctly set, the program may not be recorded if another recording is underway, or other prioritized timer setting overlaps. • You cannot record on a tape with its safety tab removed. • Before the timer recording starts, "TIMER REC" flashes in the front panel display. • The recorder automatically turns off when a timer recording finishes, even if the recording started with the recorder turned on. Program 2 will be cut off 7:00 8:00 9:00 Program 1 10:00 Program 2 will be cut off To change or cancel timer recording See "Changing or Canceling VCR Timer Settings (Timer List)" on page 84. To use the Rec Mode Adjust function If the remaining tape length is too short for the current recording, the VCR automatically changes the recording mode from SP to EP. When setting the timer, select "AUTO" in "Mode," and check that the "Tape Length" setting is correct for the inserted tape ("VCR Function" "Tape Length" of "Features" in the "Setup" display (page 105)). z Hints • When the start time and the channel or input source to be recorded are the same but the "Media" setting differs, the program is recorded to both the DVD disc and the VHS tape. • You can also turn on the Timer programming menu from the System Menu. Press SYSTEM MENU to select "Timer," and select "Timer-Standard." 82