Sony RDR VXD655 Operating Instructions - Page 29
Step 7: Easy Setup, To return to the previous display, To check the command mode for the recorder
UPC - 027242708792
View all Sony RDR VXD655 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Hookups and Settings B While holding down ENTER, enter the command mode code number using the number buttons. Command Mode Code number DVD1 number button 1 DVD2 number button 2 DVD3 number button 3 C Hold down both the number buttons and ENTER at the same time for more than three seconds. To return to the previous display Press O RETURN. To check the command mode for the recorder Press x (stop) on the recorder when the recorder is turned off. The command mode for the recorder appears in the front panel display. If the command mode for the recorder has not been changed, set the command mode for the remote to the default setting of DVD3. If the command mode for the remote is changed to DVD1 or DVD2, you will be unable to operate this recorder. Step 7: Easy Setup Follow the steps below to make the minimum number of basic adjustments for using the recorder. If you do not complete Easy Setup, it will appear each time you turn on your recorder. Settings are made in the following order. OSD Language Setup m Tuner and Channel Setup m Clock Setup m TV Type Setup m Audio Connection Setup m Finished! 123 456 789 0 "/1 O RETURN M/m/