Sony RDRGXD455 Operating Instructions - Page 92
Display, Remote control, Contents previously recorded were erased.
UPC - 027242708822
View all Sony RDRGXD455 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Nothing was recorded even though the timer setting is set correctly. , There was a power failure during recording. , Disconnect the AC power cord from the AC outlet, and connect it again. , The program contains copy protection signals that restrict copying. , The program that starts first has priority and the second program starts recording only after the first program has finished. If the programs start at the same time, the program listed first in the menu has priority (page 52). , There is no DVD inserted in the recorder. , There is not enough disc space for the recording. , The cable box/satellite receiver was turned off. Recording does not stop immediately after x STOP is pressed. , It will take a few seconds for the recorder to input disc data before recording can stop. Timer recording is not complete or did not start from the beginning. , There was a power failure during recording. , The recorder's internal clock stopped due to a power failure. The clock is automatically set by Auto Clock Set function (page 78), but it is reset during a power failure when the time signal cannot be received. Reset the clock (page 78). , The channel or input changed from the one you are recording. , The program that starts first has priority and the second program starts recording only after the first program has finished. If the programs start at the same time, the program listed first in the menu has priority (page 52). , There is not enough disc space for the recording. The c indicator flashes after timer recording is set. , Insert a recordable disc (page 12). , Insert a disc with any space for recording. , The disc has 99 or more titles, which prevents further recording. , The disc is protected (page 68). The SYNCHRO REC indicator flashes after Synchro-Recording is set. , Insert a recordable disc (page 12). , Insert a disc with enough space for the recording. , The disc has 99 or more titles, which prevents further recording. , The disc is protected (page 68). Contents previously recorded were erased. , Data that has been recorded on a DVD with a PC will be erased from the disc when the disc is inserted. Display Menus or displays do not appear on the screen. , While the recorder is reading disc information, the System Menu, OPTIONS menu, or information display will not appear. "- -:- -" appears in the front panel display. , Set the clock again (page 78). The c indicator is flashing. , The disc does not have any space for recording. , Insert a recordable disc inside the recorder. The recording mode indication is incorrect. , Since the recording mode for recorded titles is calculated after sampling the recorded data during playback, it may be displayed differently from the mode you selected when recording. However, the actual recording itself is correctly made in the selected mode. Remote control The remote does not function. , Batteries are weak. , The remote is too far from the recorder. , The remote's manufacturer code returned to the default setting when you replaced the batteries. Reset the code (page 27). , Turn on the recorder. , The remote is not pointed at the remote sensor on the recorder. , Different command modes are set for the recorder and remote. Set the same command mode (page 28). 92