Sony RM-AV3100 Operating Instructions - Page 23
When you teach signals to the, VOLUME +/ - or MUTING buttons, air-conditioner - codes for remote
UPC - 027242643154
View all Sony RM-AV3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
8 Press COMMANDER OFF. COMMANDER OFF If you keep COMMANDER OFF pressed for more than 2 seconds The Commander turns off. If you keep COMMANDER OFF pressed for less than 2 seconds The Commander returns to the previously by set mode. Notes • If you do not perform learning steps within two minutes, learning mode ends. • If you do not perform Step 6 within 10 seconds after Step 5, the display turns back to the display in Step 4. (All the learnable keys flash.) In this case, perform Step 5 again while the display is flashing. • If you touch a key by mistake in step 6, while pressing the DEL key, press the mistaken key. Then repeat from Step 5 to continue learning. If the Commander does not seem to be working If the learned key or button does not operate properly, teach once again. (For example, if the volume becomes very loud after pressing the VOLUME + button only once, noise may have interfered during the learning procedure.) If you set a component code after learning a signal If you have programmed any signal for a key or button using the learning function, that signal will remain assigned to that key or button even after you set a component code. When you teach signals to the VOLUME +/ - or MUTING buttons • If you have programmed any signal on the VOLUME +/- or MUTING button for components other than TV and AMP using the learning function, that signal will be transmitted only when you select that component. • If you have programmed any signal for the VOLUME +/- buttons or the MUTING button of TV or AMP using the learning function, that signal will be also transmitted when you select another component. However, if you have programmed any signal for the VOLUME +/- buttons or the MUTING button of another component, that signal will be transmitted only after you select that component. When you teach the signals of an air-conditioner See the notes on page 53. To display only the frequently used keys You can hide keys you do not use. After Step 4 on page 21, while pressing the DEL key, press the key you want to hide (flashing). The pressed key changes to slower flashing and will no longer be displayed during remote control operations. To display it again, perform the same procedure again. Note You cannot hide a key which has "learned" any signal. Continued 23