Sony RM-NX7000 Operating Instructions - Page 27
For Windows XP users, Installing the USB driver
View all Sony RM-NX7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Getting Started Installing the USB driver To connect a computer and the Remote Commander using the supplied USB cable, installing the USB driver to the computer is necessary. Follow the instructions below to install. Notes • If the AC power adaptor is not connected to the Remote Commander, USB cannot be detected by the computer even if the USB cable is connected. Make sure to connect the AC power adaptor before installing the USB driver. Or, the USB communication is disconnected if the Remote Commander is unloaded from the Battery charging stand. Make sure that the Remote Commander is securely loaded on the Battery charging stand. Or it is recommended to connect the AC power adaptor directly to the Remote Commander. If the USB communication is disconnected by mistake, install the USB driver again from the beginning. • Do not copy the USB driver in the supplied CD-ROM to the computer. • On Windows 2000 Professional or Windows XP, logon with the ID authorized as the computer administrator when installing "NAVITUS Design." • On Windows 2000 Professional or Windows XP, installing of the driver is required for each USB port. Therefore, perform the installation for each USB port to which the Remote Commander is to be connected. • Messages other than those of the installation procedure of the USB driver described below may appear depending on the computer. In this case, perform the installation following the on-screen instructions. For Windows XP users 1 Close all software running on Windows. 2 Insert the supplied CD-ROM in the CD-ROM drive of the computer. After a moment, "InstallShield Wizard" of "NAVITUS Design" appears. 3 Click [Cancel] to close "InstallShield Wizard" of "NAVITUS Design." 4 Connect a computer and the Remote Commander using the supplied USB cable. The "Found New Hardware" message appears in the Notification Area in the lower right-hand of the display. After a moment, "Found New Hardware Wizard" appears. Continued 27