Sony RM-TP1 Operating Instructions / Mode d’emploi - Page 25
Learning the commands of other remote commanders, Setting remote control codes
View all Sony RM-TP1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Advanced Operations Using the Auto Power function In step 5, link the remote (component) to "AUTO POWER". For the video components, the following display appears. Select the wait time and the input of the TV. Select the wait time. Select the input of the TV. Notes • The TV input may not switch automatically on all Sony TVs. This is because some TVs cannot receive remote control codes immediately after being turned on. In this case, set the wait time. • When you select "TV" as the video input, the TV input does not switch. To cancel MACRO LINK Select "OFF" in the MACRO LINK screen. Learning the commands of other remote commanders Setting remote control codes that are not stored in the commander When a remote control code is not one of the presets stored in the commander, it is possible for the commander to learn the code using the Learning function. Learning Function can be used for each preset operation keys and USER RESERVE KEYS. To program an IR code to the preset operation keys 1 Touch RM SELECT. The RM SELECT screen appears. 2 Touch the remote (component) ("MD" for example). Or, turn the jog dial to select the remote (component), then press the jog dial to enter the selection. The screen for operating the component appears. 3 Touch . The pull-down menu appears. 4 Touch LEARN in the pull-down menu. The commander enters the learning mode. "LEARN" appears. continued 25GB