Sony RM-VL610 Operating Instructions - Page 24
Notes on programming the signals for an air-conditioner, While holding, pressed
UPC - 027242744516
View all Sony RM-VL610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Programming signals of another remote control - Learning Function (continued) 2 While holding x pressed, press the Component Select button you want to erase. When erasing of a "learned" function has completed, all the other Component Select button lights turn off. during data data erasing erasing complete Notes • With this operation, you can only erase the "learned" functions of all buttons for a specific component. • To erase a single "learned" function of a Component Select button, see page 22. 3 Press SET to finish setting. To cancel erasing, press SET. Notes on programming the signals for an airconditioner About seasonal adjustments If you change the settings of the air-conditioner for the season, you have to program the remote control signals of the new settings on the Commander. If the power-on/off operation does not work correctly If the Commander can only operate "ON" with one button and "OFF" with another, while your air-conditioner's remote control can operate "ON/OFF" with a single button, program the signal on two buttons of the Commander as follows. 1 Clear the "learned" power-on/ off signal on the programmed button of the Commander. 2 Reprogram only the power-on signal of the air-conditioner on the button of the Commander by following the steps of "Programming signals of another remote controlLearning Function" (page 16). 3 Program the power-off signal of the air-conditioner on another button of the Commander. The two buttons of the Commander have been programmed with the power-on signal and the power-off signal of the air-conditioner respectively, so that you can operate the airconditioner with the Commander. 24