Sony RM-VL610 Operating Instructions - Page 27
Adding an Extra Function to the Component Select Buttons - programming codes
UPC - 027242744516
View all Sony RM-VL610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Adding an Extra Function to the Component Select Buttons Example: To clear the Power-on command 1 Press and while holding SET, press MENU. Programming the Power-On command of the selected component just by pressing that Component Select button (for Sony components only) When a code number of a Sony component is set to a Component Select button, the Power-On signal is automatically programmed to the button. You can select the desired component and power it on by just pressing that Component Select button. The SET indicator lights up. 2 While holding POWER pressed, press the desired Component Select button. While the POWER button is pressed, the Component Select buttons that Sony components are set to flash in the following order. TVtDVDtSATtCBLt VCRtCDtTAPEtAMP The Component Select buttons that Sony components are not set to do not flash. Continued 27