Home » Sony Manuals » Remote Controls » Sony RM-VL610B » Manual Viewer

Sony RM-VL610B Operating Instructions - Page 5

Learning function, Component Select button. - rm vl610 remote

Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

Learning function If your component does not work as supposed even if the code number is set, make the RM-VL610 "learn" the functions of your component's remote control. Example: To "teach" the H (play) signal of your video cassette recorder to the VCR H button of the RM-VL610 1 Place the RM-VL610 head to head with your VCR's remote control. 4 Press the button you want to "teach." VCR's remote control 2 - 4 inches (5 - 10 cm) away (approx.) RM-VL610 2 Set the RM-VL610 for "learning" mode. Press and hold SET for at least 3 seconds until the SET indicator flashes. 5 Press and hold the H (play) button of your VCR's remote control until the VCR button of the RM-VL610 lights up. 3 Press the desired Component Select button. 6 Repeat Steps 4 and 5 to "teach" other functions. 7 Finish setting. Press SET. For more details, see page 16. 5

Section	Page
Table of Contents	6
Getting Started	8
Installing the Batteries	8
When to replace the batteries	8
Location of Controls	9
Basic Operations	10
Setting the Code for non-Sony Preset Audio and Visual Components — Setting component codes	10
Setting a component code	10
Checking if the code number works	12
Setting a Component Code by the Search Function	13
Operating Your Components with the Remote Commander	14
To control the volume	15
Programming Signals of Another Remote Control — Learning Function	16
For accurate Learning	19
Programming remote control signals to the Component Select buttons and System Control buttons	20
Changing or erasing the function of a “learned” button	22
Notes on programming the signals for an air-conditioner	24
Advanced Features	25
Controlling the Volume of Visual Components Connected to an Audio System	25
Adding an Extra Function to the Component Select Buttons	27
Programming the Power-On Command of the Selected Component just by pressing that Component Select button (for Sony Components only)	27
Executing a Series of Commands — System Control Functions	29
To clear programmed commands	31
Programming a Series of Commands to on the Component Select Buttons	32
To clear programmed commands	33
Assigning Other Components to the Component Select Buttons	33
Using Other Functions	34
Locking the Controls — Hold Function	34
Erasing all settings — To reset the Commander to its factory settings	35
Additional Information	36
Precautions	36
Maintenance	36
Specifications	36
Troubleshooting	37
Appendixes	39
Table of Preset Functions	39
TV	39
VCR	40
CBL (Cable box)	40
SAT	41
DVD	42
DVR (Digital video recorder)	43
CD	44
MD	44
DECK	45
AMP	45
DAV (DVD/Receiver combo)	46
Digital TV TUNER	47