Sony RM-VL610B Operating Instructions - Page 6

Table of Contents Getting Started Installing the Batteries 8 When to replace the batteries 8 Location of Controls 9 Basic Operations Setting the Code for non-Sony Preset Audio and Visual Components - Setting component codes 10 Setting a component code 10 Checking if the code number works 12 Setting a Component Code by the Search Function 13 Operating Your Components with the Remote Commander 14 To control the volume 15 Programming Signals of Another Remote Control - Learning Function ... 16 For accurate Learning 19 Programming remote control signals to the Component Select buttons and System Control buttons 20 Changing or erasing the function of a "learned" button 22 Notes on programming the signals for an air-conditioner 24 Advanced Features Controlling the Volume of Visual Components Connected to an Audio System ...25 Adding an Extra Function to the Component Select Buttons 27 Programming the Power-On Command of the Selected Component just by pressing that Component Select button (for Sony Components only 27 Executing a Series of Commands - System Control Functions 29 To clear programmed commands 31 Programming a Series of Commands to on the Component Select Buttons ...32 To clear programmed commands 33 Assigning Other Components to the Component Select Buttons 33 Using Other Functions Locking the Controls - Hold Function 34 Erasing all settings - To reset the Commander to its factory settings ..... 35 6