Sony SAT-W60 Installation Guide - Page 13
Advanced Connection: Connecting Your VCR
View all Sony SAT-W60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Advanced Connection: Connecting Your VCR Satellite Receiver 1c 1a 1a If your TV and VCR have A/V jacks Connect the VIDEO OUT jacks of your Satellite Receiver to the A/V input jacks of your VCR using the supplied A/V cable. Then, connect the A/V output jacks of your VCR to the A/V input jacks of your TV using an A/V cable. (Be 1b sure to match the colors on the jacks with the colored plugs on the A/V cable.) Some TVs VCR and VCRs do not have stereo audio, if yours IN OUT LINE IN S VIDEO LINE OUT VIDEO AUDIO does not, just connect the white A/V cable to the Left output jack. 1b If your TV and VCR have S-Video jacks Use an S-Video cable instead of the yellow video connection. S-Video cable is supplied. z Tip To allow your Satellite Receiver to control the recording functions of your VCR, see page 14. 1c If your TV and VCR do not have A/V jacks Connect the VHF(SAT)/UHF OUT jack on the Satellite Receiver to the VHF/UHF input jack on your VCR using coaxial cable. Then, connect the VHF/UHF output jack on your VCR to the VHF/UHF input jack on your TV using a second coaxial cable. Set the CH3/CH4 switch to the channel that does not carry off-air broadcasts in your area. Note With this connection, your input source is channel 3 or channel 4 depending on how you set the CH3/CH4 switch on your VCR. 13