Sony SCPH-79001CB Instruction Manual - Page 13

Connecting digital audio equipment By using a commercially available optical digital cable to connect digital audio equipment, you can enjoy surround sound with the effect of being in a movie theater or a concert hall. When connecting the console to audio equipment with digital connectors, refer to the instructions supplied with the device to be connected. Console rear Connecting the controller 1 Insert the analog controller (DUALSHOCK®2) into a controller port of the console. MEMORY CARD Console front US Preparation Connected device DIGITAL IN OPTICAL Analog controller (DUALSHOCK®2) Commercially available optical digital cable Notes • If you connect the console to audio equipment using an optical digital cable, it may affect the audio output of some PlayStation®2 format software with the result that no sound is produced. If this happens, use a cable such as the supplied AV cable and connect it to the console's AV MULTI OUT connector. Do not use an optical digital cable. • After connecting digital audio equipment, set "Digital Out (Optical)" to "On" in the System Configuration menu. For details, see "Digital Out (Optical)" ( page 38). Note Some software titles designate a specific controller port to be used. Refer to the instructions supplied with the software for details. Connecting digital audio equipment 13