Sony SDM-X202 Operating Instructions - Page 11

Selecting the input signal (INPUT button) Press the INPUT button. The input signal and corresponding input indicator change each time you press this button. Connecting Universal Serial Bus (USB) compliant peripherals The monitor has two upstream and two downstream USB connectors. They provide a fast and easy way to connect USB compliant peripheral devices (such as keyboards, mice, printers and scanners) to your computer using a standardized USB cable. To use the monitor as a hub for your peripheral devices, connect the USB devices as follows. 1 Turn on the monitor and computer(s). Connect your computer(s) to the upstream connectors using the supplied USB cable. For customers using Windows If a message appears on your screen, follow the on-screen instructions and select a generic USB hub driver. 3 Connect your USB compliant peripheral devices to the downstream connectors. For customers using a Macintosh computer with a keyboard having a power button When you connect a Macintosh keyboard with a power button to the USB downstream connector, the power button on the keyboard does not function. To turn your Macintosh computer on, use the power button on the computer or connect the keyboard to the computer directly and turn the computer on, then disconnect the keyboard and re-connect it to the monitor. Notes • Not all computers and/or operating systems support USB configurations. Check your computer's instruction manual to see if you can connect USB devices. • In most cases, USB driver software needs to be installed on the host computer. Refer to the peripheral device's instruction manual for further details. • When you connect a computer whose power is already connected to the USB upstream connector on the monitor, the monitor will not enter the power saving mode. • When the monitor is in the power saving mode, USB peripheral devices will not function. To resume the use of USB peripheral devices, cancel the mode by pressing the 1 (power) switch. • If the peripheral devices do not function properly, confirm that the upstream input setting in "USB Select" on the OPTION menu is correct (page 17). • If you connect a keyboard or mouse to the USB connectors and then boot your computer for the first time, the peripheral devices may not function. First connect the keyboard and mouse directly to the computer and set up the USB compliant devices. Then connect them to this monitor. • When you connect peripheral devices to the downstream connectors, be sure not to lean on the display. Otherwise, the display may incline and catch your fingers. • The number of USB hubs that can be connected together is defined as up to six tiers by USB specifications. Two tiers of a USB hub are built into the monitor. Therefore, you are allowed to connect four more tiers of a USB hub together. • This monitor does not support the USB 2.0 standard. INPUT1: Select the input signal received at the monitor's HD15 input connector for INPUT1 (analog RGB). INPUT2: Select the input signal received at the monitor's DVI-D input connector (digital RGB) for INPUT2, or at the monitor's HD15 input connector (analog RGB) for INPUT2. When connecting computers to both of the monitor's video input connectors for INPUT2 (DVI-D and HD15), you can choose the connector to which a signal is input preferentially using "Input2 Priority" on the INPUT SETTING menu. For more information about "Input2 Priority," see "Selecting the input priority" on page 16. Selecting the input signal for the audio input jack See "Audio Select" on page 17. 2 GB 11