Sony SDM-X75K Quick Setup Guide - Page 4

Setup Unpacking Make sure your carton contains everything listed below. • LCD display • Power cord • Stand Base • HD15-HD15 video signal cable (analog RGB) • DVI-D video signal cable (digital RGB) • Audio cord (stereo miniplug) • USB cable • CD-ROM (utility software for Windows/ Macintosh, Operating Instructions, etc.) • Warranty card • This Quick Setup Guide The contents with mark for specifications vary depending on the models. For details, see "Specifications." Connecting your display Connect your display to a computer or other equipment. • Turn off the display, computer, and any other equipment before connecting them. • Do not touch the pins of the video signal cable plug. 1 Assemble the stand. Do not press the LCD screen when placing or raising the display straight on a desk or a like. It may affect the uniformity of the screen or damage the LCD display. Refer to an enclosed instruction,"Assemble the stand," for assembling the stand. 2 Slide down the connector cover. 3 Tilt the display up. And then move the display's angle higher. 4 Connect your display to a computer. Connecting a Macintosh computer Connect the supplied video signal cable to a video output connector on the computer. If necessary, use an adapter (not supplied). Connect the adapter to the computer before connecting the video signal cable. 5 Connect the supplied power cord securely to the display's AC IN connector. 6 Connect the other end securely to a power outlet. to the DVI-D to the HD15 input connector input connector (digital RGB) (analog RGB) INPUT 1 INPUT 2 AC IN DVI-D video signal cable (digital RGB) (supplied) DVI-D 1 4 HD15 2 HD15-HD15 video signal cable (analog RGB) (supplied) 5 to AC IN to power outlet 6 power cord (supplied) Using the stereo speakers Connect the supplied audio cord between the display's audio input jack and your computer or audio equipment. 7 Secure the cords. 4 (US)