Sony SDM-X75K Quick Setup Guide - Page 5

Turn on the display and, computer

Get Sony SDM-X75K PDF manuals and user guides View all Sony SDM-X75K manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

x Height adjustable stand Draw the cords and cables through the cable holder as illustrated. Notes • Slide up the cable holder of the height adjustable stand to open as illustrated. • When bounding the cords and cables, be sure to loosen them a little. If they get pulled hard they may come off from the connectors or plugs as you adjust the screen angle. If you stretch the cords and cables too hard they may get damaged. Turn on the display and computer 1 Make sure that the 1 (power) Indicator blinks red. At the time of your purchase, the MAIN POWER switch is set to the \ side. Note When the MAIN POWER switch on the right side of your display is not set to the \ side, press the \ side and check that the 1 (power) indicator blinks red. 2 Press the 1 (power) switch located on the front right of the display. The 1 (power) indicator lights up in US green. 3 Turn on the computer. MAIN POWER 1 lights in red 2 lights in green No need for specific drivers The display complies with the "DDC" Plug & Play standard and automatically detects all the display's information. No specific driver needs to be installed on the computer. 5 (US)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
5
(US)
US
x
Height adjustable stand
Draw the cords and cables through the cable
holder as illustrated.
Notes
•
Slide up the cable holder of the height
adjustable stand to open as illustrated.
•
When bounding the cords and cables, be sure to
loosen them a little. If they get pulled hard they
may come off from the connectors or plugs as
you adjust the screen angle. If you stretch the
cords and cables too hard they may get
damaged.
Turn on the display and
computer
1
Make sure that the
1
(power)
Indicator blinks red. At the time of
your purchase, the MAIN POWER
switch is set to the
\
side.
Note
When the MAIN POWER switch on the right side
of your display is not set to the
\
side, press the
\
side and check that the
1
(power) indicator blinks
red.
2
Press the
1
(power) switch
located on the front right of the
display.
The
1
(power) indicator lights up in
green.
3
Turn on the computer.
No need for specific drivers
The display complies with the “DDC” Plug &
Play standard and automatically detects all the
display’s information. No specific driver
needs to be installed on the computer.
MAIN POWER
lights in
red
1
2
lights in
green