Sony SHAKE-99 Operating Instructions - Page 27
Playing music from a, device, Bluetooth
View all Sony SHAKE-99 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Bluetooth 6 Perform the Bluetooth connection on the Bluetooth device. When pairing is completed and the Bluetooth connection is established, Bluetooth device name appears in the display panel. Depending on the Bluetooth device, connection may start automatically after pairing is completed. You can check the Bluetooth device address by pressing DISPLAY repeatedly. Notes • You can pair up to 9 Bluetooth devices. If the 10th Bluetooth device is paired, the oldest paired device will be deleted. • "Passkey" may be called "Passcode", "PIN code", "PIN number" or "Password", etc., depending on the device. • The pairing standby status of the system is canceled after about 5 minutes. If pairing is not successful, repeat from step 1. • If you want to pair with another Bluetooth device, repeat steps 1 to 6. To cancel the pairing operation Hold down BLUETOOTH on the unit for 2 seconds or more until "BLUETOOTH" appears in the display panel. Playing music from a Bluetooth device You can operate a Bluetooth device by connecting the system and the Bluetooth device using AVRCP. Check the following before playing music: - The Bluetooth function of the Bluetooth device is turned on. - Pairing has been completed. 1 Press BLUETOOTH on the unit to select Bluetooth function. "BLUETOOTH" appears in the display panel. 2 Establish connection with the Bluetooth device. Press BLUETOOTH on the unit to connect to the last connected Bluetooth device. Perform the Bluetooth connection from the Bluetooth device if the device is not connected. Once the connection is established, the Bluetooth device name appears in the display panel. 3 Press N to start playback. Depending on the Bluetooth device, - you may need to press N twice. - you may need to start playing an audio source on the Bluetooth device. Notes • When the system is not connected to any Bluetooth device, the system will connect to the last connected Bluetooth device automatically when you press N. • If you try to connect another Bluetooth device to the system, the current connected Bluetooth device will be disconnected. To disconnect the Bluetooth device Press BLUETOOTH on the unit. "BLUETOOTH" appears in the display panel. Depending on the Bluetooth device, the Bluetooth connection may be canceled automatically when you stop playback. 27GB