Sony SLT-A35K Instruction Manual (Large File - 12.9 MB) - Page 38
Select [Enter] with, Detach the lens
View all Sony SLT-A35K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
4 Select [Enter] with v, and press the center of the control button. The image sensor vibrates for a short time, and eliminates dust from the sensor. 5 Turn off the camera. To clean the image sensor using a blower If another cleaning is needed after using the cleaning mode, clean the image sensor using a blower following the steps below. 1 Perform the cleaning operation described in steps 1 to 4 of "To clean the image sensor automatically using the cleaning mode of the camera." 2 Detach the lens (page 28). 3 Push the V mark on the mirror lock lever with a finger to lift up the mirror. • Be careful not to touch the surface of the mirror. Mirror lock lever 38
38
To clean the image sensor using a blower
If another cleaning is needed after using the cleaning mode, clean the image
sensor using a blower following the steps below.
4
Select [Enter] with
v
, and press the center of the control
button.
The image sensor vibrates for a short time, and eliminates dust from the
sensor.
5
Turn off the camera.
1
Perform the cleaning operation described in steps 1 to 4 of “To
clean the image sensor automatically using the cleaning mode
of the camera.”
2
Detach the lens (page 28).
3
Push the
V
mark on the mirror
lock lever with a finger to lift up
the mirror.
•
Be careful not to touch the surface of
the mirror.
Mirror lock lever