Sony SLT-A57M α Handbook - Page 188
Cleaning the image sensor using a blower
View all Sony SLT-A57M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Cleaning the image sensor 4 Select [Enter] with v, and press the center of the control button. The image sensor vibrates for a short time, and eliminates dust from the sensor. 5 Turn off the camera. Cleaning the image sensor using a blower If another cleaning is needed after using the cleaning mode, clean the image sensor using a blower following the steps below. 1 Perform the cleaning operation described in steps 1 to 4 of "Cleaning the image sensor automatically using the cleaning mode of the camera." 2 Detach the lens (page 25). 3 Push the V mark on the mirror lock lever with a finger to lift up the mirror. • Be careful not to touch the surface of the mirror. Mirror lock lever 188
188
Cleaning the image sensor
If another cleaning is needed after using the cleaning mode, clean the image
sensor using a blower following the steps below.
4
Select [Enter] with
v
, and press the center of the control
button.
The image sensor vibrates for a short time, and eliminates dust from the
sensor.
5
Turn off the camera.
Cleaning the image sensor using a blower
1
Perform the cleaning operation described in steps 1 to 4 of
“Cleaning the image sensor automatically using the cleaning
mode of the camera.”
2
Detach the lens (page 25).
3
Push the
V
mark on the mirror
lock lever with a finger to lift up
the mirror.
•
Be careful not to touch the surface of
the mirror.
Mirror lock lever