Sony SLT-A57M α Handbook - Page 80
Preparation, Setting up the camera, Removing the eyecup
View all Sony SLT-A57M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Setting up the camera Removing the eyecup When attaching the FDA-A1AM Angle Finder (sold separately) to the camera, remove the eyecup. Carefully slide the eyecup off by pushing on each side of the eyecup. • Put your fingers under the eyecup, and slide it upward. Note • When an FDA-A1AM Angle Finder (sold separately) is attached to the camera, switch the display between the viewfinder and the LCD screen by pressing the FINDER/LCD button. Setting [Eye-Start AF] to [Off] is recommended because the eyepiece sensors located above the viewfinder may be activated. 80
80
Setting up the camera
When attaching the FDA-A1AM Angle Finder (sold separately) to the
camera, remove the eyecup.
Note
• When an FDA-A1AM Angle Finder (sold separately) is attached to the camera,
switch the display between the viewfinder and the LCD screen by pressing the
FINDER/LCD button. Setting [Eye-Start AF] to [Off] is recommended because the
eyepiece sensors located above the viewfinder may be activated.
Removing the eyecup
Carefully slide the eyecup off by
pushing on each side of the eyecup.
•
Put your fingers under the eyecup, and
slide it upward.