Sony SLT-A65V Instruction Manual - Page 25
all the way in and turn the, lens counterclockwise until - kit
View all Sony SLT-A65V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Preparing the camera Attaching a lens • Do not hold the part of the lens that is extended for the zoom or focus adjustment. To remove the lens 1 Press the lens release button all the way in and turn the lens counterclockwise until it stops. Lens release button 2 Attach the caps to the front and rear of the lens and the body cap to the camera. • Before you attach them, remove dust from them. • A rear lens cap is not supplied with the DT 18-55mm F3.5-5.6 SAM Lens Kit. When you store the lens without attaching it to the camera, purchase the Rear Lens Cap ALC-R55. To attach a lens hood It is recommended that you use a lens hood to reduce flare and ensure maximum image quality. Fit the hood into the mount on the end of the lens barrel and rotate the hood clockwise until it clicks. Notes • A lens hood is not included with the DT 18-55mm F3.5-5.6 SAM. You can use the ALC-SH108 (sold separately). • The lens hood may block the light of the flash. Remove the lens hood when using the flash. 25