Sony SLT-A77VQ Instruction Manual (Large File - 18.18 MB) - Page 151
Hold the camera so that the white area fully covers the AF area, the center of the multi-selector
View all Sony SLT-A77VQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Adjusting the color tones (White balance) 1 WB button t [ SET] t press the center of the multi-selector WB button Shooting (Advanced operations) 2 Hold the camera so that the white area fully covers the AF area located in the center, and then press the shutter button down. The shutter clicks and the calibrated values (Color Temperature and Color filter) are displayed. 3 Select a register number with b/B on the multi-selector, then press the center of the multi-selector. The monitor returns to the recording information display with the memorized custom white balance setting retained. • The custom white balance setting registered in this operation is effective until a new setting is registered. Note • The message "Custom WB error" indicates that the value is beyond the expected range. (When the flash is used on a subject in close proximity or a subject with a bright color is in the frame.) If you register this value, the indicator turns yellow on the recording information display. You can shoot at this point, but it is recommended that you set the white balance again to get a more accurate white balance value. To recall the custom white balance setting WB button t Select the desired register number • Press B on the multi-selector to display the fine adjustment screen and compensate the color to your preference. 151