Sony SLT-A77VQ Instruction Manual (Large File - 18.18 MB) - Page 201
Cleaning the image sensor using a blower
View all Sony SLT-A77VQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
Cleaning (Advanced operations) Cleaning the image sensor 4 Select [Enter] with v, and press the center of the multi- selector. The image sensor vibrates for a short time, and eliminates dust from the sensor. 5 Turn off the camera. Cleaning the image sensor using a blower If another cleaning is needed after using the cleaning mode, clean the image sensor using a blower following the steps below. 1 Perform the cleaning operation described in steps 1 to 4 of "Cleaning the image sensor automatically using the cleaning mode of the camera." 2 Detach the lens (page 31). 3 Push the V mark on the mirror lock lever with a finger to lift up the mirror. • Be careful not to touch the surface of the mirror. Mirror lock lever 201
201
Cleaning the image sensor
Cleaning (Advanced operations)
If another cleaning is needed after using the cleaning mode, clean the image
sensor using a blower following the steps below.
4
Select [Enter] with
v
, and press the center of the multi-
selector.
The image sensor vibrates for a short time, and eliminates dust from the
sensor.
5
Turn off the camera.
Cleaning the image sensor using a blower
1
Perform the cleaning operation described in steps 1 to 4 of
“Cleaning the image sensor automatically using the cleaning
mode of the camera.”
2
Detach the lens (page 31).
3
Push the
V
mark on the mirror
lock lever with a finger to lift up
the mirror.
•
Be careful not to touch the surface of
the mirror.
Mirror lock lever