Sony SLV-777HF Operating Instructions - Page 77
Operation, when recording on this VCR
View all Sony SLV-777HF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Operation (when recording on this VCR) Before you start editing • Turn on your TV and set it to the video channel. • Press INPUT SELECT to display "L1" or "L2" in the display window. • Press SP/EP to select the tape speed, SP or EP. P PAUSE r REC 1 Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause. 2 Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to start recording and press P PAUSE. 3 Press r REC on this VCR and set it to recording pause. 4 To start editing, press the P PAUSE buttons on both VCRs at the same time. To stop editing Press the p STOP buttons on both VCRs. Note • If you start recording following the procedure above, the VCR won't start recording with the APC function. To record a tape with the APC function, press r REC again during recording pause in step 3 so that the VCR analyzes the tape. Then when you start recording in step 4, press P PAUSE immediately after the APC indicator stops flashing. If you press P PAUSE before the APC indicator stops flashing, the APC function is canceled. Additional Operations 77