Sony SLV-D251P Operating Instructions (primary manual) - Page 38
Stop disc playback while playing back a video.
View all Sony SLV-D251P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Tip • Adjust the picture using the TRACKING +/- buttons if: - Streaks appear while playing in slow motion. - The picture shakes during pause. Notes • Tapes recorded in the LP mode on other VCRs can be played back on this VCR but the picture quality cannot be guaranteed. • The counter resets to "0:00:00" whenever a tape is reinserted. • The counter stops counting when it comes to a portion with no recording. • When 10 hours have passed, the counter in the display window returns to "0:00:00" and the count starts over again. • The sound is muted during playback at various speeds. • The picture may show noise when playing at high speed in reverse. • While playing a tape, you can display the setup menu, but the remote commander's function switches to DVD automatically. Press O RETURN repeatedly to exit the menu. • When playback does not start even if you insert a tape with its safety tab removed, set "Auto Play" to "On" in the "VIDEO FUNCTION SETUP" menu (page 91). • Stop disc playback while playing back a video. • The VCR can also play S-VHS tapes. The VCR will automatically identify the type of tape inserted in the VCR (either VHS or S-VHS). When S-VHS tapes are played in the VCR, the enhanced resolution will not be visible on screen; there may also be picture distortion while playing the S-VHS tape in slow motion or while utilizing other special playback modes. The VCR will not record in S-VHS mode on an S-VHS tape. 38 Playing a tape