Sony SLV-D261P Operating Instructions - Page 10

Step 2 : Setting up the remote commander Inserting the batteries Insert two size AA (R6) batteries by matching the + and - on the batteries to the diagram inside the battery compartment. Insert the negative (-) end first, then push in and down until the positive (+) end clicks into position. Using the remote commander You can use this remote commander to operate this DVD-VCR and a Sony TV. Buttons on the remote commander marked with an orange dot (•) (?/1, VOL +/-, CH +/-, MUTING, TV/VIDEO, ENTER and TV / the number buttons) can be used to DVD·VIDEO operate your Sony TV. If the TV does not have the symbol near the remote sensor, this remote commander will not operate SELECT VIDEO SELECT DVD the TV. Remote sensor To operate the DVD player the VCR your TV Set TV / DVD·VIDEO to DVD·VIDEO, then press SELECT DVD and point at the remote sensor at the DVD-VCR DVD·VIDEO, then press SELECT VIDEO and point at the remote sensor at the DVD-VCR TV and point at the remote sensor at your TV Notes • With normal use, the batteries should last about three to six months. • If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage. • Do not use a new battery with an old one. • Do not use different types of batteries. • Do not leave the remote commander in an extremely hot or humid place. • Do not drop any foreign object into the remote casing, particularly when replacing the batteries. • Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a malfunction. 10 Setting up the remote commander