Sony SLV-N750 Operating Instructions (SLVN750) - Page 48
Setting the RF Output channel, Select an active channel number in your area.
View all Sony SLV-N750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Setting the RF Output channel When connecting the VCR to the TV using only the antenna cable, you must set the "VCR Output CH" in the ADVANCED OPTIONS menu so that the TV can receive the correct signal from the VCR. ?/1 TV/VIDEO TV 123 456 789 0 CH +/- ?/1 CHANNEL +/- 1 Set the "VCR Output CH" to "3CH" or "4CH" (see page 47 to set the channel), whichever channel is not used in your area. If both are used, set the "VCR Output CH" to either channel. 2 Press ?/1 to turn on the VCR. 3 Press TV/VIDEO to turn on the VCR indicator in the VCR's display window. 4 Press CH +/- to display a channel number in the display window. Select an active channel number in your area. 5 Turn on your TV and set it to the channel you selected in step 1 (3CH or 4CH). The channel you selected in step 4 appears on the TV screen. If the channels change when you press CH +/-, you have made the correct setting. Whenever you use the VCR, set the TV to the channel selected in step 1. 48 Changing menu options