Sony SLV-N750 Operating Instructions (SLVN750) - Page 51
Additional Information, Antenna information
View all Sony SLV-N750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Additional Information Antenna information Attaching the external antenna connector When using a 300-ohm twin lead cable for a VHF/UHF antenna, use an antenna connector (not supplied) to connect the antenna to the VCR. 300-ohm twin lead cable Antenna connector (not supplied) 1 Loosen the screws on the antenna connector. 2 Wind the twin leads around the screws on the antenna connector. 3 Retighten the screws. Attaching a UHF/VHF band mixer When using both a 75-ohm coaxial cable and a 300-ohm twin lead cable for a VHF/UHF antenna, use a UHF/VHF band separator/ mixer (not supplied) to connect the antenna to the VCR. 300-ohm twin lead cable UHF/VHF band separator/ mixer (not supplied) 75-ohm coaxial cable 1 Loosen the screws on the mixer. 2 Wind the twin leads around the screws on the mixer. 3 Retighten the screws. 4 Connect the 75-ohm coaxial cable to the mixer. Additional Information Antenna information 51