Sony SNC-CM120 User Guide - Page 8
When using Windows XP Service Pack 2, Installing software - download
View all Sony SNC-CM120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Preparation If "Setting OK" is displayed, the IP address is correctly assigned. 12 To access the camera directly, double-click the camera name in the list. When using Windows XP Service Pack 2 Installing software A warning message regarding the active contents may appear when you install software such as IP Setup Program from CD-ROM. In this case, operate as follows: Example: In case of IP Setup Program If message "Internet Explorer" appears, click Yes. Tips • The factory setting of the camera network is as follows. IP address: 192.168.0.100 Subnet mask: 255.0.0.0 • When you select the camera in the network tab and right-click Copy, and the camera's MAC address, DHCP/FIXED*, IP address, Port number, Model name, Serial number and Version number can be copied in the clipboard. When you hold down Ctrl and press a, you can select all cameras in the network tab. * DHCP stands for a DHCP setting. FIXED stands for a fixed IP address. The welcome page of the network camera is displayed on the Web browser. Display sample: SNC-DM160 If message "File Download - Security Warning" appears, click Run. Note If you select Save in the "File Download - Security Warning" dialog, you will not be able to perform installation correctly. Delete the downloaded file, and click the Setup icon again. Note If the IP address is not set correctly, the welcome page does not appear after step 12. In that case, try to set the IP address again. 8 Assigning the IP Address to the Camera