Home » Sony Manuals » Security Cameras » Sony SNC-CM120 » Manual Viewer

Sony SNC-CM120 User Guide - Page 93

Specifications, Network, Compression

Add to My Manuals
Save this manual to your list of manuals

Page 93 highlights

Others 3) sysName= Set the case of "mib-2.system.sysName.0" in the position. The maximum length of is 255 characters. 4) enaAuthTraps= Set the case value of "mib-2.snmp.snmp EnableAuthenTraps.0" in the position. Type "1" (enable) or "2" (disable) in the position. 5) community=,r, , Set the community attributes. describes the setting identification number (1 to 8) describes the community name to be set, and describes the IP address of the host you allow access (0.0.0.0 for any host). Example: To allow reading by any host in the "private" community and having the ID number "2". community=2,r,private,0.0.0.0 6) trap=,, Set the attributes send traps to. describes the setting identification number (1 to 8), describes the community name to send traps to, and describes the IP address of the host to send traps to. Example: To specify the destination of traps as the public community and the ID number "1". trap=1,public,192.168.0.101 7) delcommunity= This parameter is used to delete the previous community setting. describes the community setting identification number (1 to 8). 8) deltrap= This parameter is used to delete the previous setting of the host to send traps to. describes the trap setting identification number (1 to 8). When you have finished changing the SNMP setting information using the above parameters 1) to 8), check the changed settings using an inquiry commands. If the changed settings are OK, restart the SNMP using the following CGI command. SNMP restart command GET, POST Specifications Network Protocol TCP/IP, ARP, ICMP, HTTP, FTP(server/client), SMTP (client), DHCP (client), DNS (client), NTP (client), SNMP (MIB-2), RTP/ RTCP Compression Video compression format JPEG/MPEG4 Audio compression format G.711/G.726 (40, 32, 24, 16 kbps) Image size SNC-DM110 / DM160 / CM120 JPEG only: 1280 × 960 (Quad-VGA) 960 × 720 768 × 576 JPEG / MPEG4: 640 × 480 (VGA) 384 × 288 320 × 240 (QVGA) SNC-DS10 / DS60 / CS20 JPEG only: 768 × 576 JPEG / MPEG4: 640 × 480 (VGA) 384 × 288 320 × 240 (QVGA) Maximum frame rate 30 fps Maximum user access 10 users Network security Password (basic authentication) IP filtering Homepage customization Homepage starts up in the built-in flash memory. Other functions Motion detection SolidPTZ (SNC-DM110 / DM160 / CM120 only) Light funnel (SNC-DM110 / DM160 / CM120 only) 93 Specifications

Section	Page
Table of Contents	2
Overview	4
Features	4
How to Use This User’s Guide	5
System Requirements	5
Preparation	6
Assigning the IP Address to the Camera	6
Assigning an IP address using the IP Setup Program	6
When using Windows XP Service Pack 2	8
When using Windows Vista	10
Accessing the Camera Using the Web Browser	13
Basic Configuration by the Administrator	15
Operating the Camera	16
Administrator and User	16
Logging in to Homepage - Welcome Page	17
Logging in as a user	17
Displaying the Administrator menu directly	18
About viewers	18
Configuration of Main Viewer	19
Main menu	19
Camera control section	19
Monitor image section	20
Controlling the Monitor Image	21
Monitoring the camera image	21
Zooming in the monitor image	22
Capturing a Monitor Image	22
Capturing a monitor image	22
Saving the captured image	23
Operating the Camera Using SolidPTZ (SNC- DM110 / DM160 / CM120 only)	23
Controlling via the control panel	23
Panning and tilting by clicking the monitor image	24
Panning, tilting and zooming by specifying the area	24
Zooming an image by the camera zoom bar	24
Displaying the preset area of the image	24
Controlling the Camera on a Full Image (SNC- DM110 / DM160 / CM120 only)	25
Displaying a specified point in the monitor window	25
Using the Trigger Button	26
Sending a monitor image via e-mail	26
Sending a monitor image to an FTP server	26
Recording a camera image as a still image	26
Controlling alarm output 1, 2	26
Controlling Day/Night function (SNC-DM160 / DS60 / CM120 / CS20 only)	26
Playing the audio file stored in the camera	27
Administrating the Camera	28
Basic Operations of Administrator Menu	28
How to setup the Administrator menu	28
Configuration of Administrator menu	29
Configuring the System - System Menu	30
System Tab	30
Date & time Tab	32
Installation Tab	33
Initialize Tab	34
System log Tab	35
Access log Tab	35
Setting the Camera Image and Audio - Camera Menu	35
Common Tab	35
Picture Tab	36
Sense up Tab (SNC-DM110 / DM160 / DS60 / CM120 / CS20 only)	38
Video codec Tab	40
Streaming Tab	44
Configuring the Network - Network Menu	46
Network Tab	46
Dynamic IP address notification Tab - Notifying the IP Address	47
Using the 802.1X Authentication Function - 802.1X Menu	49
System configuration of 802.1X network	49
Common Tab - Basic setting of 802.1X authentication function	49
Client certificate Tab	50
CA certificate Tab	51
Setting the 802.1X authentication function - Example of Windows Server 2003	51
Setting the User - User Menu	54
Setting the Security - Security Menu	55
Saving the SolidPTZ Display Area and Action - Preset position Menu (SNC- DM110 / DM160 / CM120 only)	56
Position Tab - Saving pan/tilt/ zoom position	56
Tour Tab - Setting a tour	57
Sending an Image via E- mail - e-Mail (SMTP) Menu	59
Common Tab - Setting the e-Mail (SMTP) Function	59
Alarm sending Tab - Setting the e- mail sending mode when detecting the alarm	60
Periodical sending Tab - Setting the periodical e-mail sending mode	61
Sending Images to FTP Server - FTP client Menu	62
Common Tab - Setting the FTP client function	62
Alarm sending Tab - Setting the FTP client action when detecting the alarm	63
Periodical sending Tab - Setting the periodical FTP client activity	64
Recording Images in Memory - Image memory Menu	65
Common Tab - Setting the image memory function	65
Alarm recording Tab - Setting the Image memory function when detecting the alarm	66
Periodical recording Tab - Setting the periodical recording mode	67
Folder structure of image memory	67
Downloading Images from the Camera - FTP server Menu	68
Setting the Alarm Output - Alarm output Menu	69
Alarm out 1, 2 Tab	69
Outputting Audio Linked to Alarm Detection - Voice alert Menu	70
Voice alert 1, 2, 3 Tab	70
Setting the Operations from the Viewer - Trigger Menu	71
Setting the Schedule - Schedule Menu	73
Setting the Alarm Buffer - Alarm buffer Menu	74
Setting the Motion Detection Function - Motion detection Menu	75
Setting Tab	75
Others	78
Using the Supplied IP Setup Program	78
Starting the IP Setup Program	78
Bandwidth control Tab	78
Date time Tab	79
Rebooting the Camera	79
Using the SNC audio upload tool - Transmitting Audio to Camera	80
Installing the SNC audio upload tool	80
Connecting the Camera to the Computer	80
Using the SNC audio upload tool	80
Using the SNC video player - Playing Video/ Audio File Recorded with Camera	85
Installing the SNC video player	85
Using the SNC video player	86
Using the SNC privacy masking tool - Masking a Camera Image	87
Installing the SNC privacy masking tool	87
Using the SNC privacy masking tool	87
Setting a privacy mask	88
Using the Custom Homepage Installer	89
Uploading the homepage to the camera using the Custom Homepage Installer	89
Assigning the IP Address to the Camera Using ARP Commands	91
Using the SNMP	92
1. Inquiry Commands	92
2. Setting Commands	92
Specifications	93
Glossary	94

Match case Limit results 1 per page

Others

Specifications

sysName=<string>

Set the case of “mib-2.system.sysName.0” in the

<string> position.

The maximum length of

<string> is 255 characters.

enaAuthTraps=<value>

Set the case value of “mib-2.snmp.snmp

EnableAuthenTraps.0” in the <string> position.

Type “1” (enable) or “2” (disable) in the <value>

position.

community=<ID>,r,

Set the community attributes. <ID> describes the

setting identification number (1 to 8)

<communityName> describes the community

name to be set, and <IpAddressString> describes

the IP address of the host you allow access (0.0.0.0

for any host).

Example:

To allow reading by any host in the “private”

community and having the ID number “2”.

community=2,r,private,0.0.0.0

trap=<ID>,<communityName>,

Set the attributes send traps to.

<ID> describes the

setting identification number (1 to 8),

<communityName> describes the community

name to send traps to, and <IpAddressString>

describes the IP address of the host to send traps to.

Example:

To specify the destination of traps as the

public community and the ID number “1”.

trap=1,public,192.168.0.101

delcommunity=<ID>

This parameter is used to delete the previous

community setting.

<ID> describes the community

setting identification number (1 to 8).

deltrap=<ID>

This parameter is used to delete the previous setting

of the host to send traps to. <ID> describes the trap

setting identification number (1 to 8).

When you have finished changing the SNMP setting

information using the above parameters 1) to 8), check

the changed settings using an inquiry commands.

If the

changed settings are OK, restart the SNMP using the

following CGI command.

SNMP restart command

GET, POST

Specifications

Network

Protocol

TCP/IP, ARP, ICMP, HTTP,

FTP(server/client), SMTP (client),

DHCP (client), DNS (client), NTP

(client), SNMP (MIB-2), RTP/

RTCP

Compression

Video compression format

JPEG/MPEG4

Audio compression format

G.711/G.726 (40, 32, 24, 16 kbps)

Image size

SNC-DM110 / DM160 / CM120

JPEG only:

1280 × 960 (Quad-VGA)

960 × 720

768 × 576

JPEG / MPEG4:

640 × 480 (VGA)

384 × 288

320 × 240 (QVGA)

SNC-DS10 / DS60 / CS20

JPEG only:

768 × 576

JPEG / MPEG4:

640 × 480 (VGA)

384 × 288

320 × 240 (QVGA)

Maximum frame rate

30 fps

Maximum user access

10 users

Network security

Password (basic authentication)

IP filtering

Homepage customization

Homepage starts up in the built-in flash

memory.

Other functions

Motion detection

SolidPTZ (SNC-DM110 / DM160 /

CM120 only)

Light funnel (SNC-DM110 / DM160 /

CM120 only)