Sony SNC-DF85N User Guide - Page 74
Using the SNC audio upload tool - Transmitting audio to camera, Installing the SNC audio upload tool
UPC - 027242751484
View all Sony SNC-DF85N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Others Using the SNC audio upload tool - Transmitting audio to camera The supplied SNC audio upload tool allows you to transmit sound from the computer to the camera. This section explains the setup and operations of the SNC audio upload tool. The SNC audio upload tool supports the following audio data to be transmitted. Audio CODEC G.711 (µ-LAW) G.726 G.726 G.726 G.726 Transmission rate 64 kbps 40 kbps 32 kbps 24 kbps 16 kbps Note Only one user can transmit sound to the camera. Meanwhile, another user will not be able to transmit sound to the camera. Installing the SNC audio upload tool 1 Insert the CD-ROM in your CD-ROM drive. A cover page appears automatically in your Web browser. If it does not appear automatically in the Web browser, double-click on the index.htm file on the CD-ROM. When you are using Windows Vista, pop-up "AutoPlay" may appear. For details, "Installing software" in "When using Windows Vista" on page 11. 2 Click the Setup icon of SNC audio upload tool. The "File Download" dialog opens. When you are using Windows XP Service Pack 2 or Windows Vista, a message regarding the active contents may appear. For details, see "Installing software" in "When using Windows XP Service Pack 2" on page 9 or "Installing software" in "When using Windows Vista" on page 11. 3 Click Open. Note If you click "Save this program to disk" on the "File Download" dialog, you cannot install the tool correctly. Delete the downloaded file, and click the Setup icon again. 4 Install the SNC audio upload tool following the wizard displayed. If the Software License Agreement is displayed, read it carefully and accept the agreement to continue with the installation. Connecting the camera to the computer 1 Connect a speaker to the 5 (line output) jack on the camera. 2 Connect a microphone to the microphone input jack on the computer. Note If the microphone input jack of the computer is not set correctly, no sound is transmitted from the computer and nothing is output from the speaker connected to the camera. Set the microphone input jack from the control panel of Windows. On Windows 2000 1 Select Sounds and Multimedia from Control Panel. 2 Click Volume in the Sound Recording section on the Audio tab. The Recording Control window opens 3 Check Select in the Microphone section. On Windows XP 1 Select Sounds and Audio Device from Control Panel. 2 Click Volume in the Sound Recording section on the Audio tab. The Recording Control window opens. 3 Check Select in the Microphone section. On Windows Vista There are no settings regarding the microphone jack. If recording cannot be made, connect a microphone device to the computer and check that the recording device operates correctly, as follows. 74 Using the SNC audio upload tool - Transmitting audio to camera