Sony SNC-DF85N User Guide - Page 76
Audio upload tab, Model, Serial, Enable
UPC - 027242751484
View all Sony SNC-DF85N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
address when the IP address is obtained with a DHCP server. Model: Displays the model name of the network camera. Serial: Displays the serial number of the network camera. User: Displays the specified user ID and password. The password is shown with turned letters. Select all Click to select all the cameras in the camera list. This is usable when you delete all the cameras from the list or specify the same user ID and password for all the cameras, User ID/Password Use this item when you specify the user ID and password to communicate with the selected camera(s) only. Select the camera(s) from the camera list and click this button, and the following dialog opens. Type the user ID and password for the administrator and click OK. Notes • An error dialog appears if the specified IP address already exists in the camera list, is assigned for a device other than the network camera, or does not exist in the network. • You cannot add new cameras if the maximum of 256 cameras has been displayed in the camera list. Delete Click this button to delete the selected camera(s) from the camera list. Note on switching the tab If an error occurs when you switch from the Setting tab to the Audio upload tab or the Voice alert tab, the camera is shown in red. In this case, check the camera settings and the user ID and password settings. Audio upload tab Use this menu to transmit audio from the computer to the camera. You can transmit audio to multiple cameras displayed in the camera list simultaneously. Before transmitting, set Audio upload to Enable on the Common tab of the Camera menu. Others Note If you select multiple cameras from the camera list, the same user ID and password are set for all the selected cameras. The factory settings of both items are "admin." Add Use this item when you add a new network camera to the camera list manually. Click this button, and the following dialog opens. Type the IP address and port number for the camera to be added and click OK. N (start) / x (stop) Click N (start) to start audio transmission. The transmission speed is displayed in the Bitrate box during transmission. You can adjust the microphone volume and enable/disable the muting, if necessary. To stop the audio transmission, click x (stop). 76 Using the SNC audio upload tool - Transmitting audio to camera