Sony SPP-A1070 Operating Instructions (primary manual) - Page 25
Changing a stored name and/or phone number
View all Sony SPP-A1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Telephone Features 4 Press (SELECT). "ENTER NUMBER" appears. 5 Enter the phone number. You can enter up to 16 digits, including a tone and a pause, each of which is counted as one digit. SONY 6 Press (PGM). You will hear a long confirmation beep, and the name and the number are stored. The display goes off. Notes • If you intend to save a 51st phone number, you will hear five short error beeps and "MEMORY FULL" will be displayed. You cannot store the phone number. To store another phone number, erase one of the stored phone numbers (see page 26). • Do not allow more than 20 seconds to elapse between each step of the procedure. Tips • If you have entered a wrong name or number in step 3 or 5, lower the Jog lever to erase it. Then enter the correct name or number. • The entered phone number (*) and (#) are displayed as " " and " " respectively in step 5. To store a number to be dialed via Private Branch Exchange (PBX) Before entering a phone number in step 5 above, do as follows: 1 Enter the outside line access digit (e.g., 9). 2 Press (REDIAL/PAUSE). Changing a stored name and/or phone number 1 Display the name and phone number you want to SONY change by doing steps 1 and 2 on page 27. 2 Press (SELECT). DIAL EDIT ERASE continued Telephone Features 25US