Sony SPP-S2720 Operating Instructions - Page 16

Choosing the dialing mode, Step 4

Page 16 highlights

Step 4 Choosing the dialing mode For the telephone to work properly, select an appropriate dialing mode (tone or pulse). When you set the dialing mode with the cordless handset, make sure the other cordless handsets* are not in use before you start the setting. You cannot set the dialing mode while the system is in use. * If the system includes any other additional cordless handsets. 1 Press (PGM). 2 Press (*TONE). You hear a confirmation beep. DIAL MODE 1:TONE 2:PULSE NEW OLD MASSAGE RING OFF 3 Press (1) for tone dialing or (2) for pulse dialing. You hear a long confirmation beep. If you aren't sure of your dialing system Make a trial call with the dialing mode set to TONE. If the call connects, leave the setting as is; otherwise, set to PULSE. Note Do not allow more than 60 seconds to elapse during the operation procedure. 16US Getting Started

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

Getting Started
16
US
Choosing the dialing mode
For the telephone to work properly, select an appropriate dialing mode
(tone or pulse).
When you set the dialing mode with the cordless handset, make sure
the other cordless handsets* are not in use before you start the setting.
You cannot set the dialing mode while the system is in use.
*
If the system includes any other additional cordless handsets.
1
Press
(PGM)
.
2
Press
(*TONE)
.
You hear a confirmation beep.
3
Press
(1)
for tone dialing or
(2)
for pulse dialing.
You hear a long confirmation
beep.
If you aren't sure of your dialing system
Make a trial call with the dialing mode set to TONE.
If the call connects, leave the setting as is; otherwise, set to PULSE.
Note
Do not allow more than 60 seconds to elapse during the operation procedure.
Step 4
DIAL MODE
1:TONE
2:PULSE
RING OFF
MASSAGE
OLD
NEW