Sony SRG-A40 Operating Instructions - OPERATING INSTRUCTIONS - Page 56
Detection Settings, Pan-Tilt Reset, Angle of view control Detection region setting
View all Sony SRG-A40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Pan-Tilt Reset Performs the initialization movement for the pan/tilt. Press when the POWER lamp and NETWORK lamp are flashing simultaneously or when [Execute Pan-Tilt Reset.] is displayed in the angle of view control section. Angle of view control section Operates pan, tilt, or zoom to adjust the start position. Each movement speed of pan/tilt and zoom can be adjusted. Detection Settings Configures the setting for detecting the object of PTZ Auto Framing. ɞ ɟ ɠ Detection region setting section When PTZ Auto Framing is enabled and the object enters into view here, the object is detected automatically and the camera starts tracking it. The setting is valid when the automatic selection of the tracking object is On. Drag the blue edge to adjust. Automatic Target Selection When this setting is valid, the settings of [Detection Area], [Tracking Timeout], and [Detection Restart Time] are valid, and the tracking object is detected and selected automatically when PTZ Auto Framing is started. While this setting is invalid, when PTZ Auto Framing is started, selecting the tracking object manually is required. Tracking setting section Sets the time for the tracking's time-out, restart and judgement of the object being lost. Tracking setting section Menu item Detail and setting value Tracking 0 to 60 Timeout (second) Detection 0 to 600 Restart (second) Time Wait Time 1 to 60 (second) Initial setting value of the factory default setting Content 0 Valid when the tracking subject is detected automatically. Sets the interval for time-out when the face of the tracking subject cannot be detected during tracking. By time- out, the camera returns to the start position and detects the tracking subject again. The default value is 0 seconds. When 0 seconds is set, there is no time-out. 0 Valid when the tracking subject is detected automatically. Stops the tracking forcibly, returns to the start position and sets the interval for detecting the tracking subject again. After tracking starts when the setting time has passed, the camera returns to the start position to detect the subject again. The default value is 0 seconds. When 0 seconds is set, tracking does not start again. 6 Sets the waiting time for when the tracked person is lost while tracking. When Automatic Target Selection is valid, the camera returns to the start position and detects the tracking subject again. When Automatic Target Selection is invalid, the camera waits for the tracking subject to appear again in the screen. When the subject does not return to the screen, set a new tracking subject manually. 56