Sony SRG-X400 BRC-X400 / X401 / SRG-X400 / X402 / 201M2 / X120 / HD1M2 CGI Com - Page 49

Parameter V6FilterRule V6SynFloodBurst V6SynFloodExpire V6SynFloodLimit V6SynFloodProtection Set Inq Value Description Set [Value1] Setting of IPv6 Filter function rules. Inq 0 to 9 Up to 10 rules can be set. [Value2] IPv6 address [Value3] 0 to 128 V6FilterRule=Value11,Value21,Value31,Value 41,Value51,Value61,Value12,Value22,Value3 2,Value42,Value52,Value62[,...,Value110, Value210,Value310,Value410,Value510, Value610] [Value4] tcp, udp, icmp, all [Value5] 0 to 65535 [Value6] allow, reject [Value1] Setting of rule number Smaller value means higher priorities [Value2] Setting of supported network address [Value3] Setting of subnet mask value QoS supports (bit number from the left side of network address) [Value4] Setting of supported protocol tcp : TCP udp : UDP icmp : ICMP In this case, port number (Value5) will be discarded, but it is still necessary. Filter will be applied for all ICMP messages. all : TCP, UDP, ICMP The port number (Value5) designation only works for TCP and UDP. [Value5] Setting of supported port numbers When set to 0, all the Port numbers are supported. [Value6] Setting of policy allow : Specified accesses to the camera will be allowed. reject : Specified accesses to the camera will be denied. Set 2 to 3 to 60 Setting of continuing numbers of SYN Inq Packet to be judged as attacks by IPv6 SYN Flood Attack Protection function. Set 10 to 60 to 86400 Setting of the predetermined time to Inq discard the results judged as an attack with the SYN Flood Attack Protection function of IPv6 (unit: second) Set 1 to 5 to 1000 Setting of the possible access times per Inq minute after releasing the defense with the SYN Flood Attack Protection function of IPv6. Set on, off On/Off setting of the SYN Flood Attack Inq Protection function of IPv6. 49