Sony SRS-X88 Operating Instructions - Page 4
Precautions, On safety, On placement, On operation, On cleaning, Others - reset
View all Sony SRS-X88 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Precautions On safety The nameplate indicating the Sony trademark, model number and electrical rating is located on the bottom exterior of this unit. The MAC address is located on the bottom exterior of this unit. MAC1: MAC address of wired network MAC2: MAC address of Wi-Fi network Before operating the unit, be sure that the operating voltage of the unit is identical with that of your local power supply. Where purchased All countries/regions Operating voltage 100 V - 240 V AC, 50 Hz/60 Hz Notes on the AC adaptor When connecting or disconnecting the AC adaptor, turn off the unit beforehand. Otherwise, it may cause malfunction. Use only the supplied AC adaptor. To avoid damaging the unit, do not use any other AC adaptor. Do not leave the unit in a location near heat sources, or in a place subject to direct sunlight, excessive dust, moisture, rain or mechanical shock. On operation Do not insert any small objects, etc., into the jacks or ventilation hole on the rear of the unit. The unit may short out or malfunction. On cleaning Do not use alcohol, benzine, or thinner to clean the cabinet. Others If you have any questions or problems concerning this unit that are not covered in this manual, please consult your nearest Sony dealer. When disposing of or giving away this unit, make sure to initialize it to reset all settings to the factory defaults (page 24). Polarity of the plug Plug the AC adaptor into a nearby wall outlet (mains). In the case of a problem, unplug it from the wall outlet (mains) immediately. Do not install the AC adaptor in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire or electric shock, do not expose the AC adaptor to dripping or splashing, and do not place objects filled with liquids, such as vases, on the AC adaptor. The validity of the CE marking is restricted to only those countries where it is legally enforced, mainly in the countries EEA (European Economic Area). On placement Do not set the unit in an inclined position. 4US