Sony ST-SE370 Operating Instructions - Page 17

Specifications FM tuner section Frequency range 87.5 - 108.0 MHz (U.S. models: 100 kHz step, other models: 50 kHz step) Aerial terminals 75 Ω, unbalanced U.S. models: F-TYPE CONNECTOR, other models: IEC-male Intermediate frequency 10.7 MHz Sensitivity at 26 dB quieting (mono) 10.3 dBf, 0.9 µV/75 Ω at 46 dB quieting (stereo) 38.5 dBf, 23 µV/75 Ω Usable sensitivity (IHF) 10.3 dBf, 0.9 µV/75Ω S/N at 40 kHz deviation 74 dB (mono), 69 dB (stereo) Harmonic distortion 0.09% (mono), 0.18% (stereo) Frequency response 30 Hz - 15 kHz (+0.5/-1.0 dB) Separation 45 dB at 1 kHz Selectivity at 400 kHz 85 dB at 300 kHz 70 dB Output at 40 kHz deviation 600 mV Additional Information AM tuner section Frequency range MW: ST-SE570 522 - 1,611 kHz (9 kHz step) ST-SE370 U.S. models: 530 - 1,710 kHz (10 kHz step*) Singaporean and Australian models: 531 - 1,710 kHz (9 kHz step) Other models: 531 - 1,602 kHz (9 kHz step) LW: 144 - 288 kHz (1 kHz step) Intermediate frequency 450 kHz Usable Sensitivity MW: LW: (with AM loop aerial) 200 µV/m 700 µV/m Signal-to-noise ratio MW: LW: 54 dB (50 mV/m, 999 kHz) 50 dB (50 mV/m, 216 kHz) Harmonic distortion 0.3% (50 mV/m, 400 Hz) Selectivity 50 dB General Power requirements U.S. models: Australian models: Other models: 120 V AC, 60 Hz 230 V AC, 50 Hz 230 V AC, 50/60 Hz Power consumption 10 W Dimensions 430 x 83 x 290 mm (w/h/d) Weight 2.5 kg Supplied accessories Audio cord (1) AM loop antenna (1) FM wire antenna (1) EON connecting cord (ST-SE570 only, 1) * (U.S. models only.) You can change the AM tuning interval to 9 kHz. After tuning in any AM station, turn off the tuner. Hold down the numeric button 9 and press the POWER button. To reset the scale to 10 kHz, hold down the numeric button 0 and press the POWER button to turn on the tuner. All preset stations will be erased when you change the tuning interval. Design and specifications are subject to change without notice. 17