Sony ST-SE370 Operating Instructions - Page 7
Selecting the German display, Storing FM stations automatically (Auto-betical Select) - 30
View all Sony ST-SE370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting Started Mains lead hookup Connect the mains lead to a wall outlet after completing all of the previous connections. ANTENNA FM AM 75Ω COAXIAL y OUTPUT R L EON CONTROL OUT To a wall outlet Selecting the German display You can select either an English or a German language display. The factory preset language is English. To change the display to German, follow the steps below. 1 Press POWER to turn off the tuner. 2 While pressing down the numeric button 2, press POWER to turn on the tuner. "Deutsch" appears in the display. To return to the English display Repeat this procedure. "English" appears in the display. Storing FM stations automatically (Auto-betical Select) (European model only) With Auto-betical Select you can automatically store up to 30 FM and FM RDS stations in alphabetical order without redundancy. Additionally, Auto-betical Select only stores the stations with the clearest signals. If you want to store FM or AM (MW and LW) stations one by one, see "Presetting radio stations" on page 8 and "Receiving broadcasts" on page 9. 1 Press POWER to turn on the tuner. 2 Turn on the amplifier and select the TUNER mode. 3 Press AUTO BETICAL SELECT. "Yes" and "No" appear in the display. 4 Turn TUNING/SELECT to select "Yes". 5 Press AUTO BETICAL SELECT again. The tuner scans and stores all the FM and FM RDS stations in the broadcast area. For RDS stations, the tuner first checks for stations broadcasting the same programme, then stores only the one with the clearest signal. The selected RDS stations are sorted alphabetically by their Programme Service name, then assigned a two-character preset code. For more details on RDS, see page 12. Regular FM stations are assigned twocharacter preset codes and stored after the RDS stations. Tip To change the location of, or erase, a preset station, see "Organizing the preset stations" on page 11. Notes • If you move to another area, repeat this procedure to store stations in your new area. • For details on tuning stored stations, see page 8. • The FM MODE setting is also stored along with the station. • If you move the antenna after storing stations using Auto-betical Select, the stored settings may no longer be valid. If this happens, store the stations again. 7