Sony STR-DA3ES Operating Instructions - Page 48
Adjustments using the SET UP button, MULTI CH 1 and 2.
View all Sony STR-DA3ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Adjustments using the SET UP button The SET UP button allows you to make the following adjustments. 1 Press SET UP. 2 Press the cursor buttons ( or ) to select the parameter you want to adjust. 3 Turn the jog dial to select the setting you want. The setting is entered automatically. 4 Repeat steps 2 and 3 until you have set all of the parameters that follow. Initial settings Parameter 6.1CH DECODING MULTI CH 1 or 2 D.POWER V.POWER S.FIELD LINK DECODE FORMAT AUTO FUNCTION 2ND ROOM SP1) 3RD ROOM SP2) 2 WAY REMOTE3) COMMAND MODE T.TONE OSD OSD H.POSITION OSD V.POSITION Initial setting AUTO NONE AUTO OFF AUTO OFF ON AUTO ON ON ON ON AV1 NORMAL COLOR 4 4 1) When the SPEAKER switch is set to "MAIN+2ND ROOM" only. (STR-DA3ES only) 2) When the SPEAKER switch is set to "MAIN+3RD ROOM" only. (STR-DA5ES only) 3) STR-DA5ES only. x 6.1ch decoding mode (6.1CH DECODING) You can set this parameter using 6.1CH DECODING on the front panel (page 34). • When set to "AUTO", the receiver performs 6.1 channel decoding only if 6.1 channel signals decode flag is ON. • When set to "ON", the receiver performs 6.1 channel decoding only if the surround signals are multi channel format [3/2], [3/2+1] or [3/3], regardless of the 6.1 channel decode flag. • When set to "OFF", the receiver does not perform 6.1 channel decoding. Tip The 6.1 channel decoding flag is the information recorded on the software (DVD, etc). x Multi channel assignment (MULTI CH 1 or 2) Lets you assign a function to MULTI CH 1 or 2. You cannot assign TUNER or PHONO. You cannot assign the same function to both MULTI CH 1 and 2. 48