Sony STR-DA5700ES Operating Instructions (Large File - 11.23 MB) - Page 87
Outputting the HDMI signals even when the receiver is in standby mode (Pass Through), Pass Through
View all Sony STR-DA5700ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Using Other Features 1 Turn on the receiver and the two monitors. 2 Press HDMI OUTPUT. Each time you press the button, the output will be switched as follows: HDMI A t HDMI B t HDMI A + B t OFF t HDMI A... You can also use the HDMI OUT button on the receiver. Notes • If the compatible video format differs between the monitors connected to the HDMI OUT A jack and the HDMI OUT B jack of the receiver, "HDMI A + B" may not work. • Depending on the playback equipment you connect, "HDMI A + B" may not work. Outputting the HDMI signals even when the receiver is in standby mode (Pass Through) You can output the video and audio signals from the HDMI IN jack to the TV connected to the HDMI OUT A jack even when the receiver is in standby mode. If you use this function while "Control for HDMI" is set to "On," the input of the receiver is switched in accordance with the operation of the connected equipment, even when the receiver is in standby mode. When you activate this function, make the settings for "Pass Through" following the steps below. 1 Select "Settings" from the home menu, then press . 2 Select "HDMI Settings," then press . 3 Select "Pass Through," then press . 4 Select the parameter you want, then press . Parameter On Off Explanation When the receiver is in the standby mode, the receiver outputs HDMI signals from the receiver's HDMI OUT A jack. The receiver does not output HDMI signals when in the standby mode. Turn on the receiver to enjoy the connected equipment's source on the TV. This setting saves power in the standby mode, compared with the "On" setting. 87US