Sony STR-DA777ES Primary User Manual - Page 33
Understanding the Multi-Channel Surround Displays
View all Sony STR-DA777ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Enjoying Surround Sound Understanding the Multi-Channel Surround Displays 1 23 4 5 6 7 8 OPTICAL COAXIAL a DIGITAL L C R L.F.E. S.WOOFER STEREO RDS MEMORY a MPEGDTSDUAL PRO LOGIC LS S RS D.RANGE EQ MONO TA NEWS INFO !™ !¡ !º 9 !£ 1 OPTICAL Lights up when the source signal is a digital signal being input through the OPTICAL terminal. 2 COAXIAL Lights up when the source signal is a digital signal being input through the COAXIAL terminal. 3 a DIGITAL This indicator lights when the sound field is on and the unit is decoding signals recorded in the Dolby Digital (AC-3) format. 4 Playback channel indicators The letters light to indicate the channels being played back. L: Front Left R: Front Right C: Center LS: Left Surround RS: Right Surround S: Surround (monaural or the rear components obtained by Pro Logic processing) The boxes around the letters light to indicate the speakers used to playback the channels. See the next page for details regarding the playback channel indicators. 5 L.F.E. The letters "L.F.E." light up when the disc being played contains the LFE (Low Frequency Effect) channel. When the sound of the LFE channel signal is actually being reproduced, the bars underneath the letters lights up to indicate the level. Since the LFE signal is not recorded in all parts of the input signal the bar indication will fluctuate (and may turn off) during playback. 6 S.WOOFER Lights when the sub woofer selection is set to "YES" and sound is being output from the sub woofer. 7 Tuner indicators These indicators light when using the receiver to tune in radio stations, etc. See pages 48~51 for tuner operations. 8 MEMORY Lights when a tuner preset or sound field preset is saved in memory. 9 D. RANGE Lights when dynamic range compression is active. See page 43 to adjust the dynamic range compression. !º PRO LOGIC Lights when this unit applies Pro Logic processing to two channel signals in order to output the center and surround channel signals. !¡ DTS Lights up when DTS signals are input. Note When playing a DTS format disc, be sure that you have made digital connections and that DIGITAL/ANALOG is NOT set to ANALOG (see 4 on page 25). !™ a Lights when Dolby Digital (AC-3) signals are input. !£ EQ Lights when using an equalizer from EQ PRESET 1~5. 33