Sony STR-DA777ES Primary User Manual - Page 47

Settings and Adjustments p Sound Field Link S.FIELD LINK [OFF] Initial setting : OFF When set to [ON], the sound field that was last applied to a program source is automatically applied whenever it is selected. For example, if you listen to CD with STADIUM as the sound field, change to a different program source, then return to CD, STADIUM will be applied again. If you do not want to use this function, set to [OFF]. p CONTROL A1 auto function AUTO FUNCTION [ON] Initial setting : ON Lets you set whether the CONTROL A1 auto function can turn Sony components connected via CONTROL A1 cord (see page 12) on or off and control their functions as if in a system or not. Select [OFF] when you do not want system control of the other components. p Setting up the 2 way remote 2-way REMOTE [ON] Initial setting : ON If you want to use this receiver together with another component that is also compatible with the 2 way remote control system, be sure to perform the following operation to limit response to signals sent from the remote controls. • To use with the TA-E9000ES, turn OFF this unit's 2 way remote control system. Make sure the TA-E9000ES is turned on when using this unit. • To use with other components that have the logo, turn OFF the other component's 2 way remote control system. For details, refer to the operating instructions suppled with your other components. • To use with Sony CD players CDP-CX260 or CDP-CX88ES, turn OFF the remote control adapter switch on the CDP-CX260 or CDP-CX88ES. For details, refer to the operating instructions suppled with the CDP-CX260 or CDP-CX88ES. • When using several 2 way remote control system components together, be sure to place them close together in order to enable proper remote operation. p Naming Program sources XXXXXXXX [ ] Lets you register a name of up to 8 characters for the currently selected function. Touch or to move the position and turn the jog dial to select a character. When you are finished entering the name, press ENTER. When you want to clear a name that has been registered, touch or to make the 8 character boxes blink. Turn the jog dial one click to the right to make the name appear as 8 spaces and then press ENTER. z You can easily enter the names of components manufactured by Sony When or is touched to make the 8 character boxes blink... • First, turn the jog dial one click to the right to display the name as 8 spaces. If ENTER is pressed at this time, the name is cleared. •If you continue turning the jog dial to the right, the model names of components manufactured by Sony appear. Press ENTER to confirm a new name. If you want to make changes to the name, touch until the character you want to change blink and turn the jog dial to change the character. p Memory clear MEMORY CLEAR [NO] Initial setting : NO To clear the memory, select [YES] and press ENTER. "Are you sure?" is displayed. Select [YES] and press ENTER again. The unit automatically turns off, and then turns on again. The memory is cleared. p Sleep timer SLEEP X:XX:XX Initial setting : OFF Lets you set the receiver to turn off automatically after a certain time. Simply select how long you would like to wait before the unit turns itself off. Countdown begins automatically. The timer can be adjusted in 30 minute steps up to 9 hours using the receiver and up to 2 hours using the remote. To cancel the sleep function, select [OFF] before the count down is complete. 47